Integrate Yeastar S-Series VoIP PBX with Hikvision Intercom Video Devices

By integrating Yeastar S-Series VoIP PBX with Hikvision Video Intercom Indoor & Door Station, you can establish video & audio call between the Indoor Station and the Door Station.



Prerequisites

Make sure the Hikvision devices meet the following requirements:

  • Hikvision DS-KD8003 Door Station: v2.0.0 or later.
  • Hikvision DS-KH6320 Indoor Station: v2.1.0 or later.
  • Local Network (Tested Environment)

    In this guide, the Hikvision devices and Yeastar PBX are in the same local network. FigureLocal Network Topology

    The following table shows the information of the tested environment.

    Public Network

    If your PBX is not in the same network with Hikvision devices, you need to do port forwarding on the router.

  • SIP registration port: Default UDP 5060
  • RTP ports: Default UDP 10000-12000
  • Note: Hikvision devices and the iVMS 4200 client must in the same local network.

    Supported Hikvision product models

    Download the PDF file here...

    Post a Comment

    Previous Post Next Post