How to Setup SIP Trunk with IP Office R9?
The Avaya IP Office 500 platform is configured using the “Avaya IP Office Manager”. Below you will find screen captures of the user interface used to configure the platform specific to the provisioning of a SIP trunking service.
In this example we are using a SIP trunking service from an ITSP (Internet Telephony Service Provider)The screen below illustrates the network configuration parameters provided by ITSP.
Step 1: IP Office Configuration
IP Office firmware: IP Office 500 v2 with 9.0.3.16 build 2 firmware
SIP Licenses: Make sure to have SIP Trunk Channel license. I have 10 channels in total
Note: All the IP Addresses assign for the entire configuration are provided by Internet Telephony Service Provider (ITSP).
System, LAN2 Configuration
System, LAN2, VoIP Configuration
System, LAN2, Network Topology Configuration
Global DNS Configuration
Global Voice Codec Configuration
(Creating SIP Line)-Line, New, SIP Line
(Creating SIP Line)- Line, SIP Line, Transport Configuration
(Creating SIP Line)- Line, SIP Line, SIP URI Configuration
(Creating SIP Line) - Line, SIP Line, VoIP Configuration
(Creating SIP Line)- Line, SIP Line, T38 Fax Configuration
(Creating SIP Line)- Line, SIP Line, SIP Credentials Configuration
That’s it the SIP line configuration has now been completed.
SIP Trunking is surely the most underrated yet valuable measure for business of every size. It not only reduce the cost but also highly reliable. Check out https://www.thinktel.ca/services/sip-trunking/sip-trunking-overview/ if you are looking for more details.
ReplyDeletePost a Comment